This handy little Camera Mount allows you to use your Bebcare iQ or Motion Camera to tilt and keep an even better watch in the crib or when out-and-about.

Includes:

• 1x Bebcare camera mount
• **Camera sold separately

Features:

• Twist clamp that can secure onto most locations, including baby stroller or crib.
• Rubber surface on the clamp.
• Quick-release mechanism.
• Compatible with the Bebcare iQ or Motion Monitor only.

On! Off! On! Off! Load shedding is driving us all up the wall but we hope we can make life a little easier with the Vizia Mini UPS.

It's uninterruptible power supply with five voltage outputs can supply power to two devices simultaneously, and is ideal to supply backup power to your Bebcare Baby Monitor and Wifi router.  During load shedding, the UPS will automatically switch to battery power, and your devices will stay on without any interruption.

The Mini DC UPS can be set up in seconds, with only one cable between the UPS and each device to connect. It also has a 5V USB output, so it can be used as a regular power bank to charge a cell phone. The batteries inside are high quality lithium ion with an expected life span of 6-8 years.

NB: Please read the information below depending on which Monitor you are intending to purchase as the backup power will be different for each.  It is also important to note that if you are connecting a second device such as a Wifi router, that the backup time will be less depending on how much power the second device consumes.

 What's included:

• VIZIA Mini DC UPS
• AC Power Supply 12V
• DC Splitter Cable
• DC Cable
• DC Adapter

Backup power times for Bebcare Monitors:

• Bebcare Hear - both parent and child unit can operate off batteries however if you wish to power up the child unit, it will run for up to 15hrs.
• Bebcare Motion - power up the camera (child unit) for up to 11hours.
  
• Bebcare iQ Wifi - power up the camera (child unit) for up to 7.5hours. Power will be less depending on your Wifi routers consumption.

Specifications:

• Model: VIZ-R616-ESP
• Capacity: 57.72Wh
• Battery type: 6 pcs x 2600mAh lithium ion 18650
• Output voltage: 5V / 9V / 12V / 19V / 24V
• Output current: 5/9/12V 2A, 19/24V 1A
• Output power: 24W
• Input voltage: 100-240V AC
• Weight: 455g
• Size: 159x112x32mm
• Certification: CE, ROHS, FCC, PSE
• Protection: over charge, overload, short circuit

Exactly what you will get::

• 1x Additional Camera for the Motion Video Baby Monitor
• 1x USB-C Power adapter
• **Parent unit sold separately (camera only).
• ** This unit is only operational when used in conjunction with the Bebcare Motion Parent Unit.

Camera Specifications:

• Compatible with the Bebcare Motion only (not the Bebcare iQ)
• High-quality video sensor.
• Excellent 640x480 resolution for radio-frequency based video monitor.
• Comfort starry night light.
• 360° pan-and-tilt camera.
• 6 Music lullabies.
• Ultra-low radiation mode automatically enabled, emitting 91% less wireless transmission.
• Embedded temperature sensor detects temperature of the room and is displayed on the parent unit.
• Reduces wireless transmission to 0 in standby mode. Only activates when your baby is crying.
• Operates using the USB-C power adapter only.
• For load shedding, easily plug into a backup UPS power supply using the USB-C power adapter (see wattage, output, voltage specs below).
• Has standard point on the back of the unit for easy wall mounting.
• Optional breathing sensor (sold separately).
  
• Bebcare Motion Parent Unit supports up to 4 cameras. When connected to 2 camera units, the parent unit screen supports "Split Screen View". This view can display two baby monitor videos side-by-side at the same time.
  
• **Please note that the thickness and number of walls between the parent and child unit will impact the range to some degree.

Optional accessories (not included):

• Breathe Motion Sensor Mat
• Additional Spare Cameras
• Crib Mount

Certification, Awards & Accreditations:

• Conforms to IEC Safety Standards (IEC 60065)
• Conforms to EN Safety Standards (EN 60065), Health (EN 62311), EMC (EN 301 489-1, 3 & 17), Radio Spectrum (EN 300 328, 300 220-1 & 2)
• ICASA certified TA-2020/5381
• DSR Digital Safe Radio Ultra-Low Radiation
• EMF Academy’s No.1 Low EMF Monitor of 2020
• Mothering’s Top Safest Baby Monitor
• Proud Member of the US Juvenile Products Manufacturers Association

The science bit – LOW EMISSION – it matters more than we think!

• Did you know that a baby’s brain absorbs 60% more radiation than the average adult? Or that a baby monitor 1 meter away from a crib emits the radiation equivalent to a cell phone tower 150 meters away?
• A worrying majority of baby monitors available to parents today employ transmission technologies that emit strong doses of radiation, all through the day, and even when on standby. These operate at up to 2.4 Ghz: the same bandwidth used by microwave ovens. While radiation carries documented health risks for people of all ages, children and babies are especially vulnerable.
• Bebcare’s patented radio technology emits 91% less wireless transmission and reduces wireless transmission to 0 in standby mode. And, it only activates when your baby is crying.

What’s included:

• 1 x Parent unit (operates on mains and internal battery)
• 1 x USB-C power adapter
• ** This unit only works when used in conjunction with the Bebcare Motion Camera

Parent unit specifications:

• 300m wireless range (clear line of sight**). The number and thickness of walls will lessen the range.
• Excellent 640x480 resolution for radio-frequency based video monitor.
• 4.3” high-quality baby video display.
• Temperature sensor.
• Background white noise silencer.
• Two-way talkback.
• Can be set to vibrate when it detects your baby is crying.
• A low battery alert will sound when it's time to recharge.
• The out-of-range alert system will let you know when you are outside of range.
• Operates when plugged into the mains using the USB-C power adapter. When unplugged and fully charged, it will hold a charge of up to 20 hours when in standby mode.
• Supports up to 4 cameras. When connected to 2 camera units, the parent unit screen supports "Split Screen View". This view can display two baby monitor videos side-by-side at the same time.
• **Please note that the thickness and number of walls between the parent and child unit will impact the range to some degree.

Certification, Awards & Accreditations:

• Conforms to IEC Safety Standards (IEC 60065)
• Conforms to EN Safety Standards (EN 60065), Health (EN 50663), EMC (EN 301 489-1 & 3), Radio Spectrum (EN 300 220-1 & 2)
• ICASA certified TA-2020/5405
• DSR Digital Safe Radio Ultra-Low Radiation
• EMF Academy’s No.1 Low EMF Monitor of 2020
• Proud Member of the US Juvenile Products Manufacturers Association

The science bit - Low Emission - it matters more than we think!

• Did you know that a baby’s brain absorbs 60% more radiation than the average adult? Or that a baby monitor 1 meter away from a crib emits the radiation equivalent to a cell phone tower 150 meters away?
• A worrying majority of baby monitors available to parents today employ transmission technologies that emit strong doses of radiation, all through the day, and even when on standby. These operate at up to 2.4 Ghz: the same bandwidth used by microwave ovens. While radiation carries documented health risks for people of all ages, children, and babies are especially vulnerable.
• Bebcare’s patented radio technology emits 91% less wireless transmission and reduces wireless transmission to 0 in standby mode. And, it only activates when your baby is crying.